Capicitor Application Issues
Capacitors must be built to tolerate voltages and currents in excess of their ratings according to standards. The applicable standard for power capacitors is IEEE Std 18-2002, IEEE Standard for Shunt Power Capacitors.
Heat as one of most common cause of motor failure
This slide speaks about that how motor operation fails due to heat. how heat affect motors?
Tuesday, 6 May 2014
A Practical Guide to Earth Resistance Testing
12:15
No comments
Broadly speaking, “earth resistance” is the resistance of soil to the
passage of electric current. Actually, the earth is a relatively poor
conductor of electricity compared to normal conductors like copper
wire. But, if the area of a path for current is large enough, resistance
can be quite low and the earth can be a good conductor. It is the earth’s
abundance and availability that make it an indispensible component of a
properly functioning electrical system
Control_of_active_power_&_frequency
08:11
No comments
§The frequency of a system is
dependent on active power balance
§As frequency is a common factor throughout the system, a change in active
power demand at one point is reflected throughout the system
§Because there are many
generators supplying power into the system, some means must be provided to
allocate change in demand to the generators
Fspeed governor on each generating unit provides primary speed
control function
Fsupplementary control originating at a central control center
allocates generation
§In an interconnected system,
with two or more independently controlled areas, the generation within each
area has to be controlled so as to maintain scheduled power interchange
§The control of generation
and frequency is commonly known as load
frequency control (LFC) or automatic generation control (AGC)
PLC Complete Training For Beginners
04:38
13 comments
This is a complete guide for beginners which are intrested in PLC. This .Rar file consists of PLC software, file containing different plc symbols, Different PLC problems with their solution. And also tell complete procedure of making a PLC
Subscribe to:
Posts (Atom)