My title page contents

Capicitor Application Issues

Capacitors must be built to tolerate voltages and currents in excess of their ratings according to standards. The applicable standard for power capacitors is IEEE Std 18-2002, IEEE Standard for Shunt Power Capacitors.

Heat as one of most common cause of motor failure

This slide speaks about that how motor operation fails due to heat. how heat affect motors?

Sunday, 31 May 2015

BASICS OF CIRCUIT BREAKERS

BASICS OF CIRCUIT BREAKERS

https://app.box.com/s/a0g02kxma9xvwk4uepe9


Transformers, Generators protection theory

Transformers, Generators protection theory


CLICK THE DOWNLOAD LINK BELOW TO DOWNLOAD
https://app.box.com/s/ime61v9zu54jikq3jm6x


Sunday, 24 May 2015

Programmable Logic Controllers:Programming Methods and Applications

Programmable Logic Controllers:Programming Methods and Applications

 

 DOWNLOAD BOOK BY CLICKING DOWNLOAD BUTTON BELOW

 

https://app.box.com/s/83o26ykz65y4tknlnj6t

 

Medium Voltage Design

Medium Voltage Design



https://app.box.com/s/o0dzuumnopwmg7vmk42djfp4l0em2q3y


Wednesday, 20 May 2015

Fundamentals Of Electrical Distribution - EATON

Fundamentals Of Electrical Distribution - EATON





PLEASE CLICK ON BELOW LINK TO DOWNLOAD BOOK




Saturday, 16 May 2015

PROGRAMABLE LOGIC CONTROLLER APPLICATION GUIDE

PLC - Programming Methods and Applications – John R. Hackworth and Frederick D. Hackworth, Jr.

 

DOWNLOAD FROM BELOW LINK

 

https://app.box.com/s/83o26ykz65y4tknlnj6t

 

TRANSFORMER PROTECTION GUIDE

https://app.box.com/s/aooqckazbpe5m708htte

ELECTRICAL INSTALATIONS BOOK

https://app.box.com/s/asqz3xvl35p922sykfq1

Friday, 15 May 2015

BUS BAR SCHEMES



Introduction:
The selection of any bus bar system depends upon the following:
1. Amount of flexibility required in operation.
2. Immunity from total shutdown.
3. Initial cost of the installation.
4. Load handled by the busbar.
Busbar systems are of the following types:
Single bus single breaker scheme:
Such busbar scheme is........

 FOR COMPLETE FILE PLZ DOWNLOAD FROM BELOW LINK
http://www.datafilehost.com/d/80c1cb5e

SUBSTATION GROUNDING SYSTEM



SUBSTATION GROUNDING SYSTEM

Fundamental theory:
The sole purpose of substation grounding/earthing is to protect the equipment from surges and lightning strikes and to protect the operating persons in the substation. The substation earthing system is necessary for connecting neutral points of transformers and generators to ground and also for connecting the non current carrying metal parts such as structures, overhead shielding wires, tanks, frames, etc to earth. Earthing ofsurge arresters is through the earthing system. The function of substation earthin......


http://www.datafilehost.com/d/b8512676

Thursday, 14 May 2015

Introduction of Grid Station Main and Auxiliary Equipment



Introduction of Grid Station Main and Auxiliary Equipment





   TRANSFORMERS

Electrical transformer is a static device which transforms electrical energy from one circuit to another without any direct electrical connection and with the help of mutual induction between to windings. It transforms power from one circuit to another without changing its frequency but may be in different voltage level.

  USE OF POWER TRANSFORMER
Generation of Electrical Power in low voltage level is very much cost effective. Hence Electrical Power is generated in low voltage level. Theoretically, this low voltage leveled power can be transmitted to the receiving end. But if the voltage level of a power is increased, the current of the power is reduced which causes reduction in ohmic or I2R losses in the system, reduction in cross sectional area of the conductor i.e. reduction in capital cost of the system and it also improves the .......


DOWNLOAD LINK BELOW FOR COMPLETE PDF FILE


 http://www.datafilehost.com/d/8aa4b48d